PHASE ONE P40 + 40mp 4:3 IMAGE Sensor+
Get ready for a capture revolution... Take your photography to the ultimate level with capture rates of up to 1.8 fps in Sensor+ mode and ISO range from 50 to 3200!
The ground breaking Sensor+ technology has been designed to deliver the fastest capture rate and allows you to switch between 40 and 10 megapixel captures!
The Capture Revolution has started....
The Phase One P 40+ Camera system is designed to be a seamless extension of your creativity. Extraordinary capture becomes natural through ease of use and direct control.
Shoot digital or film with no lens or back restrictions. Take advantage of the Phase One digital lenses or use your Mamiya 645 AF/ AFD or Hasselblad V lenses for an even broader choice.
The P 40+ is a capture revolution. With capture rates of up to 1,8 frames per second in Sensor+ mode and an ISO range from 50 to 3200, this digital back is truly revolutionary.
The Sensor+ technology allows you to switch between 40 and 10 megapixel captures, offering a unique tool for almost any job.
What is Sensor+ ?
Sensor+ is the ability to scale pixel size dynamically.
This allows the photographer to shoot full frame 645 format with 60.5 AND 15 megapixels in the same medium format camera system.
On top of that, sensitivity is increased by a factor of 4, giving photographers an astounding ISO range from 50 to 3200!
Key Features
Switch between 40 and 10 megapixel captures using Sensor+
40 megapixels for highest image quality and detail level
10 megapixels for higher sensitivity and faster workflow
ISO range from 50 - 3200
Fast capture rates - up to 1.8 fps
Extreme 12.5 f-stop dynamic range
- Detailed Specifications
- IMAGING TECHNOLOGY
- Lens Factor 1.3
- Resolution 40 megapixels
- Active Pixels 7320 x 5484 pixels
- CCD size effective 44 mm x 33 mm
- Pixel Size 6 x 6 micron
- Image Ratio 4:3
- DynamicRange 12.5 f-stops
- P 40+ FULL RESOLUTION CAPTURE MODE
- Resolution 40 megapixels
- Pixel Size 6 x 6 micron
- RAW File Compression IIQ large: 40 MB
- IIQ small: 26 MB
- ISO 50, 100, 200, 400, 800
- SENSOR+ CAPTURE MODE
- Resolution 10 megapixels
- Pixel Size 12 x 12 micron
- RAW File Compression IIQ large: 10 MB
- IIQ small: 7 MB
- ISO 200, 400, 800, 1600, 3200
- OUTPUT FILES
- Colour Depth 16 bit per color
- Image File Formats All output formats of Capture One are
- possible: TIFF-RGB, TIFF-CMYK, JPEG
- Colour Management RGB, Embedded ICC profile, CMYK
- LCD SCREEN
- Size 2.2"
- Resolution 230,400 pixels
- Viewing Angle 160§
- LIGHTING
- Supports all photographic lights: Flash, tungsten, daylight, fluorescent, HMI
- OPERATING CONDITIONS
- Temperature 0§ to 40§C (32§ to 122§F)
- Humidity 15 to 80% RH (non-condensing)
- COMPUTER MINIMNUM REQUIREMENTS
- Mac Fast Intel CoreT 2 Duo or later CPU, 4 GB RAM,
- Fast HDD: RAID 0 configured systems for max performance,
- Nvidia 8800 series graphics card or newer
- PC Intelr Pentiumr 4, 2 GB RAM, 10 GB free hard disk
- space, IEEE 1394 interface, Windows XPr, Service
- Pack 3 or Windows Vistar, Service Pack 1
- P+ BACK MOUNTS
- Phase One/ Mamiya Phase One 645 AF, Mamiya 645AFDII/ AFDIII, Mamiya RZ67 PRO IID via adaptor
- Phase One H101 Hasselblad H1 and H2
- Hasselblad V Hasselblad 555ELD, 553ELX, 503CW and 501CM
- Via adaptor: Mamiya RZ67 Pro II&Mamiya RB67
- Contax Contax 645
- WIDE ANGLE&TECHNICAL CAMERAS 4 x 5" via FlexAdaptor: Arca Swiss, Cambo, Linhof, Toyo, Sinar, Plaubel, Horseman.
- STORAGE FILES Phase Ones IIQ RAW file format speeds up the image capture and file transfer. It increases the storage capacity by turning the full 16 bit image data into a compact RAW file format. The default IIQ RAW-large format is completely lossless.
- SOFTWARE Capture One 4.8 or later
Compare to other products in the Medium Format Cameras & Accessories range.
Compare to other products in the Phase One range.
