Rode Video Mic PRO
(This microphone has been designed particularly for the DSLR-VIDEO user, but will work also with any camera/camcorder with a 3.5mm-minijack-input) The RODE VideoMic Pro raises the bar set by the original RODE VideoMic, by combining broadcast quality audio with an ultra compact and lightweight ergonomic design.
Incorporating new features specific to high end video, the VMP also evolves many of the features that have made the VideoMic so successful. Noise transference has been significantly reduced using both a revised, more elegant shock mounting system and a lightweight premium cable.
- Broadcast recording quality condenser microphone
- Compact design (only 150mm/6" length)
- Ultra lightweight (only 85g/3oz)
- 9V battery powered, with up to 70 hours battery life (alkaline)
- Integrated shock mounting
- Integrated foam windshield
- 3.5mm stereo mini-jack output (dual mono)
- Two step High Pass Filter (flat, 80Hz)
- Three position level control (-10dB, 0, +20dB)
- Camera shoe mount with 3/8" thread for easy boompole mounting
- Power 9V alkaline battery (Current 7.8mA)
- Acoustic Principle Line Gradient
- Directional Pattern Super-Cardioid
- Frequency range 40Hz-20kHz, selectable HPF @ 80Hz/12dB/octave
- Output impedance 200O
- Signal noise ratio 74 dB SPL (A - weighted per IEC651)
- Equivalent noise 20 dB SPL (A - weighted per IEC651)
- Maximum SPL 134dB SPL (@ 1kHz, 1% THD into 1KO load)
- Maximum output voltage +6.9dBu (@ 1% THD into 1kO)
- Sensitivity -38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Weight 85g/3ozgm
- Dimensions 95mm/3.74"mmH x 43mm/1.69"mmW x 150mm/6"mmD
Compare to other products in the Microphones range.
Compare to other products in the Rode range.
