RODE VIDEO MICROPHONE
Directional Video Condenser Microphone The RODE VideoMic is a professional grade shotgun microphone. Based on the latest 'Film industry' technology, the VideoMic is designed specifically for use with high quality Digital Video Cameras.
The microphone exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight, yet rugged due to it's ABS construction. The VideoMic is powered by a standard 9V battery and offers a Low Battery LED status indicator and a switchable high pass filter to reduce unwanted low frequency rumble.
The VideoMic attaches to any Camcorder that has the standard camera-shoe fitting and utilizes a stereo mini jack for audio output.
Studio recording quality
Condenser microphone
9V battery powered
Integrated shock mounting
Two step High-Pass Filter - Flat or 80Hz
Three step PAD - 0, -10, -20dB
Rugged reinforced ABS construction
Windshield included
3.5mm mini-jack output
Integrated cold shoe mount, 1/4" and 3/8" thread
- Directional Video Condenser Microphone
- The RODE VideoMic is a professional grade shotgun microphone. Based on the latest 'Film industry' technology, the VideoMic is designed specifically for use with high quality Digital Video Cameras.
- The microphone exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight, yet rugged due to it's ABS construction. The VideoMic is powered by a standard 9V battery and offers a Low Battery LED status indicator and a switchable high pass filter to reduce unwanted low frequency rumble.
- The VideoMic attaches to any Camcorder that has the standard camera-shoe fitting and utilizes a stereo mini jack for audio output.
- Studio recording quality
- Condenser microphone
- 9V battery powered
- Integrated shock mounting
- Two step High-Pass Filter - Flat or 80Hz
- Three step PAD - 0, -10, -20dB
- Rugged reinforced ABS construction
- Windshield included
- 3.5mm mini-jack output
- Integrated cold shoe mount, 1/4" and 3/8" thread
- Power 9V battery powered
- Acoustic Principle Line gradient
- Directional Pattern Super Cardioid
- Frequency range 40Hz-20kHz, selectable HPF @ 80Hz/12dB/octave
- Output impedance 200O
- Signal noise ratio 74 dB SPL (A - weighted per IEC651)
- Equivalent noise 20 dB SPL (A - weighted per IEC651)
- Maximum SPL 134dB SPL (@ 1kHz, 1% THD into 1KO load)
- Maximum output voltage
- Sensitivity -38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Weight 176gm
- Dimensions 65mmH x 250mmW x 102mmD
Compare to other products in the Microphones range.
Compare to other products in the Rode range.
