enjoy it now pay 4 x interest free
4 payments of $114.50 paid fortnightly

Description

The Nikon FT1 Mount Adapter allows you to use certain Nikkor F-mount lenses (designed for Nikon SLR and DSLR cameras) on the new Nikon 1 V1 camera. In order to use this adapter, the V1 camera's firmware must be updated to at least version 1.10. An F-mount lens will produce an angle of view equivalent to 2.7x the view when used with a full-frame SLR or DSLR camera (an F-mount 50mm lens, for instance, will provide an angle of view on the V1 equivalent to a 135mm lens on a full-frame SLR or DSLR camera). When a VR (Vibration Reduction) lens is used, VR functions can be used. Autofocusing is possible when using AF-S lenses, but focus mode must be set to AF-S (Single AF) and AF-area mode is fixed at Single-point, using only the center focus point. AF/AE supported with AF-S lenses only. When using CPU lenses, [P], [S], [A], and [M] exposure modes can be used, while only [A] and [M] exposure modes can be used with non-CPU lenses. The aperture is set using the aperture ring on the lens.

Shooting in Motion Snapshot mode is only possible when focus has been acquired with an AF-S lens. The Smart Photo Selector function cannot be used. As of December, 2011, the FT1 Adapter is compatible with 65 existing F-mount Nikkor lenses.

Use Nikkor F-mount lens with V1/J1 cameras.

For Nikon 1 V1&J1 cameras--the camera's firmware must be updated to at least version 1.10.

When using the FT-1 and a compatible AF-S NIKKOR F-Mount lens, users can take full advantage of the Nikon 1's high-speed continuous shooting of 10/30/60 fps. (*When an AF-S lens is used. However, focus is locked with the first shot with continuous shooting.)

[P], [S], [A], and [M] exposure modes can be used with CPU lenses.

Vibration reduction (VR) functions when VR lenses are used. Enable vibration reduction, or specify a setting, using switches on the lens. NORMAL/ACTIVE modes are supported when lenses equipped with these modes are used. VR functions in NORMAL mode when lenses not equipped with the NORMAL/ACTIVE modes are used.

The Smart Photo Selector function cannot be used.

AF/AE supported with AF-S lenses only. Autofocusing is possible when AF-S lenses are used. However, focus mode must be set to AF-S (Single AF) and AF-area mode is fixed at Single-point with only the center focus point used.

The focus indicator (rangefinder) can be used with CPU lenses.

[A] and [M] exposure modes can be used with non-CPU lenses. Aperture is specified using the aperture ring on the lens.

Shooting in Motion Snapshot mode is only possible when focus has been acquired with an AF-S lens.