Rode Stereo VideoMic Pro Rycote

Ideal for Video & DSLR Cameras

Integrated Rycote Lyre Shockmount

Matched Pair, 1/2" Condenser Capsules

XY Stereo Configuration

Level Switch: -10 / 0 / +20 dB

High-Pass Filter Switch: 75 Hz

Kevlar-Reinforced Braided Cable

1/8" (3.5mm) Output Connector

9V Battery Powered

Includes Foam Windscreen

The Stereo VideoMic Pro Rycote from Rode builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.

The integrated Rycote Lyre shockmount system protects against handling noise. The Stereo VideoMic features a high-pass filter switch at 75 Hz for minimizing low-frequency noise, and a -10 dB pad for maximizing headroom on behalf of capturing loud signals without distortion. The +20 dB level-boost switch is specifically designed to provide a higher-quality signal with DSLR cameras. When activated, the camera preamp level is reduced, resulting in a lower noise floor and a much clearer recording.

Broadcast-recording-quality on-camera microphone

Matched pair, 1/2" condenser capsules in X/Y stereo configuration

Ultra-lightweight, compact form factor

Two-step high-pass filter (flat, 75 Hz)

Three-position level control (-10, 0, +20 dB)

9V-battery-powered - over 100 hours of use (alkaline)

Integrated Rycote Lyre shockmount

Denser foam windscreen

1/8" (3.5mm) stereo mini-jack output

Billeted metal camera shoe mount with 3/8" thread for easy boompole mounting

• Transducer ... Pressure gradient
• Polar Pattern ... XY Cardioid
• Frequency Range ... 40 Hz to 20 kHz (selectable HPF @ 75 Hz)
• Sensitivity ... -38 dB (12.6 mV @ 94 dB SPL) ±2 dB re 1 V/Pa @ 1 kHz
• Output Impedance ... 200 Ohms
• Maximum Output ... +4.2 dBu (@ 1% THD into 1 kOhms)
• Dynamic Range ... 100 dB
• Maximum SPL ... 134 dB, max (1 kHz, 1% THD into 1 kOhms load)
• Signal / Noise ... 76 dBA (A-weighted per IED651)
• Power Supply ... 9 V alkaline battery
• Connection ... 1/8" (3.5 mm) stereo mini-jack
• Signal to Noise Ratio ... 76 dBA SPL (A-weighted per IEC651)
• Dimensions (D x W x H) ... 4.5 x 3.1 x 5.3" (115 x 80 x 134 mm)
• Weight ... 0.26 lb (116 g) (without battery)
• Packaging Info
• Package Weight ... 0.6 lb
• Box Dimensions (LxWxH) ... 8.5 x 5.1 x 3.2"