DJI Focus Pro Grip

Attach this DJI Focus Pro Grip to either side of your DJI R3 Pro or RS 4 Pro gimbal and control your Focus Pro Motor configuration for precise FIZ. The grip has an integrated 1.8" touchscreen display, front dial, mode button, and record buttons for intuitive control over your camera and lens operations. Toggle AMF mode to engage autofocus, causing the front dial to rotate simultaneously and allowing cinematographers to visually observe the focus status on the monitor and via tactile feedback. Manual mode can then be engaged and disengaged intuitively.

Three USB-C ports facilitate communication between the Focus Pro LiDAR unit, Focus Pro Motor, and your camera. 2.4 GHz and Bluetooth communication allow for wireless transmission. Use the built-in NATO clamp and included adapters to attach the grip to either side of your gimbal configuration. A built-in battery keeps the grip running for 2.5 hours at a time, and it can recharge via PD fast charging technology using the USB-C port.

• General
• Compatibility
• DJI Focus Pro Motor / RS 4 Pro Gimbal Stabilizer / RS 3 Pro Gimbal Stabilizer
• Display
• Display Size
• 1.8"
• Touchscreen
• Yes
• Inputs / Outputs
• USB I/O
• 4 x USB-C Female Input
• Wireless
• Wireless
• 2.4 GHz Radio/RF / Bluetooth
• *Built-In
• Power
• Power Source
• Battery
• Battery Type
• 1x Internal Rechargeable
• DC Input Power
• 6.6 to 8.4 VDC
• Environmental
• Operating Temperature
• -4 to 113°F / -20 to 45°C
• Physical
• Mounting
• 1x NATO Clamp
• 2x NATO Rail
• 1x M4 Screw
• 1x 1/4"-20 Screw
• Color
• Black
• Cable Length
• 15.7" / 40 cm
• Dimensions
• 6.4 x 2.9 x 2.3" / 162 x 73 x 59 mm
• Weight
• 17 oz / 482 g