RODE NTG3B Moisture-Resistant Shotgun Microphone (Black)

Features

Capture broadcast-quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the black Rode NTG3B moisture-resistant shotgun microphone. Professional-level features such as low-noise circuitry, upgraded immunity to radio-frequency interference, and minimal handling noise reduce the need to repair and restore audio in postproduction.

High Sensitivity and Clear Sound

The NTG3B's high sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG3B delivers consistently clear sound due in part to its gentle rise in high frequencies and its rumble-reducing attenuation of low bass frequencies. Its switch- and dial-free design lets you set up quickly and focus on the sound instead of fiddling with various mic settings. The solid brass housing is both durable and lightweight, and its anti-glare finish prevents reflections in the shot.

Designed to Withstand Adverse Environmental Conditions

• When your work takes you outdoors, you're bound to encounter humidity and condensation, which can cause many mics to fail.
• The NTG3B's RF bias technology makes it almost completely resistant to moisture, allowing you to reliably capture high-quality audio in normal and adverse environmental conditions.
• It also includes a weatherproof aluminum storage cylinder for maximum protection during travel.

Broadcast-Quality Sound

The NTG3B was engineered for broadcast-quality sound, enhanced immunity to RF (radio frequency) interference, and low handling noise. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.

Focused Directionality

The combination of the NTG3B's 10" long body and supercardioid polar pattern yields focused on-axis directionality with maximum rejection behind the mic. Its low self-noise of 13 dBA and highly sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.

Phantom Powered

• Thanks to its 3-pin XLR output and compliance with 44 to 52 VDC phantom power, the NTG3B is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.

Ideal for Boompole Mounting

• The NTG3B includes a mic clip for easy placement on a mic stand or boompole.
• Alternatively, mount the NTG3B in the Rode SMR-4 shockmount (available separately) to impede the transfer of vibrations between your boompole and the mic.

Windscreen Minimizes Wind Noise

The NTG3B has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).

Specifications

Microphone

Primary Applications

Broadcast, ENG (Electronic News Gathering), Audio for Video, Location Sound

Form Factor

Stand/Boom Mount

Intended Sound Sources

Vocals, Speech/Voice-Over

Sound Field

Mono

Element Type

Condenser

Diaphragm

0.5" / 12.70 mm

Polar Pattern

Supercardioid

Orientation

End Address

Circuitry

Solid-State

Pad

No

High-Pass Filter

No

Performance

Frequency Range

40 Hz to 20 kHz

Maximum SPL

130 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)

Off-Axis Rejection

8 dB at 60¡ã
18 dB at 120¡ã
17 dB at 180¡ã

Impedance

25 Ohms

Sensitivity

-30 dBV/Pa at 1 kHz

Dynamic Range

117 dB

Signal-to-Noise Ratio

81 dB A-Weighted

Equivalent Noise Level

13 dB A-Weighted

Analog Output

1x XLR 3-Pin

Power

Power Sources

Phantom Power

Operating Voltage

48 V

Physical

Color

Black

Mounting Thread Size

5/8"-27 Female (3/8"-16 Female with Included Adapter)

Construction Material

Brass

Dimensions

?: 0.75 x L: 10.04" / ?: 19 x L: 255 mm

Weight

5.75 oz / 163 g (Microphone)